The Stuart Turner mounting pad gives added sound insulation which in turn reduces the transfer of noise from the motor and vibration from the pump itself.
Constructed using dual density layers to provide increased vibration and noise reduction.
Application:
Effectively reduces noise and vibration from the pump
Operates from the same site in Henley-on-Thames where the company started in 1906.
A contributory member of the BPMA (British Pump Manufacturers Association).
The UK’s market leading manufacturer of shower pumps for over 40 years.
Continually Evolving and Innovating Continual investment in research and development ensures Stuart Turner remains at the forefront of design technology and innovation.
Developed the domestic shower pump market in the 1970’s.
Holders of numerous patents relating to shower pump technology including GB2494485 for Flomate and GB2349908 for mainsboost.
Four additional shower pump technology patent applications currently in progress.
Engineering Patents include everything from the Milking Machine to the 650cc water cooled, two stroke motor bike between 1912 and 1913!
Quality
Every pump is manufactured from only the highest quality components and raw materials.
Each individual pump is fully tested before leaving the factory.
If you change your mind about the product when you receive it you can notify us any time within 365 days and return it for a full refund at your own cost. Any refunds will be made within 14 days of receiving your returned item. You are expected to cover the cost to return the item and your initial delivery charge will not be refunded.
This mat is purpose made to absorb shower pump vibration noise and has proved to be so worthwhile. We had the previous pump mounted directly on wood and the noise of vibration could be heard throughout the house. We'd become used to it!
When we bought the new pump I decided to go for this mat as well and we can barely hear the pump at all now. It's like there is no pump when we turn on the shower!
Very impressed with this product. Grit your teeth and buy it - cost over a lifetime works out just fine.
5/ 5
Ian Taylor
rated this
5/5
★★★★★
The old pump beat out a fair tattoo on the floor of the airing cupboard, and I noticed this item advertised alongside the replacement pump.
It works well enough to dampen down the vibrations, and had the added bonus of bringing the new pump up to the level of the old one, so negating the need for a new plinth.
5/ 5
MartynW
rated this
5/5
★★★★★
Seems pricey but it certainly does the trick, to cut out vibration and keep the noise level down, so worth the cost. Used between the pump and a small wooden trestle inside an airing cupboard, constructed to support the pump, and stops any vibration passing down to the floor.
5/ 5
Geoff
rated this
5/5
★★★★★
The overall pump and antivibration installation is very quiet. I can't tell the effect of the Base however it is of good quality. My pump is located on a wooden floor in a hotpress and from previous experience, I would never install a similar pump without a antivibration base.
5/ 5
Tony De Sousa
rated this
5/5
★★★★★
This mounting pad really does reduce the noise and bit ratio of our shower pump. I fitted the new pump first and tried it with and without the mounting pad. When fitted you could hardly hear the pump operating. Really good product and definitely recommend it to all.
5/ 5
Steve Nickson
rated this
5/5
★★★★★
I bought this after it was recommended for the new replacement shower pump I bought. It's excellent, noise from the new pump is about 10% compared to the old pump with out the mat. The delivery etc was excellent, thanks again, great product.
5/ 5
Neil
rated this
5/5
★★★★★
Old pump was sitting straight on flooring in the loft so took a gamble and purchased this with the new pump. It really helps dampen the pump noise whine/vibration especially in a new-ish build house where the walls are paper thin!
5/ 5
Steve C.
rated this
5/5
★★★★★
I bought this with a Stuart Turner Monsoon Universal 3 Bar twin shower pump. It is an expensive bit of kit for what it is, but it works ! My pump is installed in an airing cupboard and when the door is shut I can't hear it !
5/ 5
S attilia
rated this
5/5
★★★★★
This anti vibration mounting pad is just the job to minimise the sound and vibration from the pump. Bit pricey but worth every penny when compared to cheaper options and no need to cut the pad to accommodate the pump
5/ 5
Paul
rated this
5/5
★★★★★
Well made and super quick delivery, works really well in cutting vibration from the pump. A tad more expensive than other i looked at but in the end it does the job 100% so satisfaction guaranteed.
5/ 5
Dave Maude
rated this
5/5
★★★★★
Requires no specific fitting. Just place it under the pump and it does a really good of isolating whatever sound was transferring through the feet into the surface below.
